Axis P1365 Mk II, User Manual

Page: 11 / 77

AXIS P1365 Mk II Network Camera
Access the product
Controls on the Live View Page
Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.
Click WDR on to enable WDR in intense backlight conditions. Click WDR off to disable WDR in low
light conditions for optimal exposure.
Select a stream profile for the Live View page from the Stream Profile drop-down list. For information
about how to configure stream profiles, see page 23 .
Click Pulse to activate the product’s output port for a defined period of time. For information about how
to enable and configure output buttons, see page 34 . The output button name may differ depending on
the name entered in the I/O Ports configuration.
Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For
information about how to enable and configure output buttons, see page 34 .
Use the Manual Trigger button to trigger an action rule from the Live View page. For information about
how to configure and enable the button, see Manual Trigger on page 11 .
Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when
the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config >
Action Buttons .
The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the
audio clip and click the Play button.
Manual Trigger
The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to
validate actions during product installation and configuration.
To configure the manual trigger:
1. Go to Setup > Events .
2. Click Add to add a new action rule.
3. From the Trigger drop-down list, select Input Signal .
4. From the second drop-down list, select Manual Trigger .
5. Select the desired action and configure the other settings as required.
For more information about action rules, see Events on page 46 .
To show the manual trigger buttons in the Live View page:
1. Go to Setup > Live View Config .
2. Under Action Buttons , select Show manual trigger button .
11