Axis P1365-E Mk II User Manual Download Page 36

Page: 36 / 74

AXIS P1365-E Mk II Network Camera

PTZ (Pan Tilt Zoom)

3. Specify the pause length between runs.

4. Select an available preset position and click

Apply

5. Specify the

View Time

in seconds or minutes.

6. Specify the

View Order

or select the

Random view order

option.

7. Click

Save

To modify or remove guard tours, go to

PTZ > Guard Tour

, select the guard tour in the

Guard Tour List

and click

Modify/Remove

For more information see the online help

Note

This Axis product supports limited guard tours. The pause between successive guard tours must be set to at least 10 minutes.

Advanced

Controls

Advanced PTZ settings can be configured under

PTZ > Advanced > Controls

The

Panel Shortcut Command Buttons

list shows the user-defined buttons that can be accessed from the Live View page’s

Ctrl

panel

. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.

Click

Add

to add a new shortcut command button.

The following PTZ controls are enabled by default:

•

Pan control

•

Tilt control

•

Zoom control

To disable specific controls, deselect the options under

Enable/Disable controls

If using multiple view areas, deselecting a control will only disable the control in the selected view area.

Note

Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to
preset positions that require a tilt movement.

Install PTZ Driver

This Axis product supports several PTZ devices. Please see

www.axis.com

for a complete list of supported devices, and to obtain the

correct driver. To install a PTZ device you need to install the PTZ driver.

To install the PTZ driver go to

PTZ

Driver Selection

Browse

to find the driver (e.g. driver.ptz) and

Upload

. If the driver was

successfully uploaded, it appears in the

Select driver to use

drop-down list. From this drop-down list, select the driver to install

or remove, and click

Save

Select

Activate PTZ

to enable PTZ. The address of the connected device appears against

Device ID

. Choose the

Device type

from the

drop-down list. To find which device type to use, consult the documentation supplied by the PTZ driver.

To complete the installation go to

System Options

Ports & Devices

COM Port

and verify the settings.

Summary of Contents for P1365-E Mk II











































































Search results

Summary of Contents for P1365-E Mk II

Reviews:

Related manuals for P1365-E Mk II

Brands by name

Popular brands

Axis P1365-E Mk II, User Manual

Search results

Summary of Contents for P1365-E Mk II

Reviews:

Related manuals for P1365-E Mk II

Brands by name

Popular brands