Axis P1347-E, User Manual

Page: 36 / 61

AXIS P1347–E Network Camera
Events
Events
The Axis product can be con fi gured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that de fi nes how and when the action is triggered is called an
Action Rule
.
Available Action Rule triggers and conditions include:
• Applications — use installed applications to trigger the rule, see Applications, on page 35 .
•
Detectors
-
Audio Detection
— trigger the rule when audio is detected, see Audio detection, on page 34 .
-
Motion Detection
— trigger the rule when motion is detected, see Motion Detection, on page 32 .
- Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 32 .
• Hardware
-
Network
— trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
•
Input Signal
-
Digital Input Port
— trigger the rule when an I/O port receives a signal from a connected device, see I/O
Ports, on page 49 .
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
the Live View page, on page 13 . This can for example be used to validate actions during product installation
and con fi guration.
• PTZ
-
Moving
— trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
-
Preset Reached
— trigger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
•
Storage
-
Available
— trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance noti fi cations.
- Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked — trigger the rule if the storage device is locked (write protected).
•
System
-
System Initializing
— trigger the rule when the product is being started. This can for example be used to send a
noti fi cation when the product restarts.
•
Time
- Recurrence — trigger the rule periodically, see Recurrences, on page 38 . This can for example be used to upload
an image every 5 minutes.
- Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 38 .
Available
actions
include:
36