Section 5: Setup for OS/2
40
Axis NPS 650 User’s Manual
Install the NPS 650
Once the Axis Print Utility is installed and running, you can install the
NPS 650 by clicking the Install entry on the action bar. The Install
command initiates a search for Axis print servers on the network. Your
new NPS 650 will appear in the list (together with any other Axis print
servers) as three printer ports:
The digits following AX are the six last digits of the NPS 650 serial
number (480061 in this example). LP1, LP2 and CM1 are the NPS 650
printer ports (LPT1, LPT2 and COM1 respectively).
The Axis print server ports appearing in the list can now be assigned as
print queue destinations as described below.
Note:
If the serial number of your NPS 650 is
000231480061
, then the default
port names are
AX480061.LP1, AX480061.LP2
and
AX480061.CM1
.
The serial number is found on the label at the back of the NPS 650. You
may change the default names by editing parameters LPRINT_1,
LPRINT_2, etc. in the config file as described in Appendix A. If you want
to change the default port names, you must do that before installing the
NPS 650 using Axis Print Utility.
AX480061.LP1
AX480061.LP2
AX480061.CM1
nps_650.bk : cfg_os2.frm Page 40 Tuesday, November 14, 1995 8:54 AM
