Section 3: Setup for NetWare
Axis NPS 650 User’s Manual
17
Print Server Mode (Automatic)
The setup procedure involves adding a print server and linking it to one
or more print queues. Both steps are carried out in PCONSOLE.
Add a Print Server
Follow these steps to add a print server to your NetWare environment:
1.
Log in to a file server from a client workstation.
2.
Start PCONSOLE.
3.
NetWare 4.xx only:
Press <F4> to switch to
Bindery Mode
.
4.
Select
Print Server Information
(3.xx) or
Print Servers
(4.xx).
5.
Press <Insert> to add a new Print Server.
6.
Enter the Print Server Name:
AXIS<nnnnnn>
(see notes below)
<
nnnnnn> are the last six digits of the NPS 650 serial number.
7.
Press Escape to return to the Main Menu.
Repeat this procedure for each
file server
using the NPS 650.
Notes:
1. If the serial number of your NPS 650 is
000231480061
, then the
default name is
AXIS480061
. The serial number is found on the label
at the back of the NPS 650.
2. You may change the default name using AXCFG, the Axis Configura-
tion Software. This must be done before running PCONSOLE.
3. The print server name is case insensitive in print server mode. Both
AXIS480061
and
Axis480061
are valid default print server names.
nps_650.bk : cfg_novl.frm Page 17 Tuesday, November 14, 1995 8:54 AM
