Section 3: Setup for NetWare
Axis NPS 550 User’s Manual
23
NPS 550
Configuration
The configuration involves specifying the configuration file server. This is
done using AXCFG, the Axis NPS installation software on the disk
supplied with the NPS 550. Follow the instructions in the read.me file on
the disk to install the software, then proceed as follows:
1. Start AXCFG, and select
NetWare
.
2. Select No at the ‘Look for old print servers’ prompt
unless you are
configuring an NPS 550 with software revision prior to 4.20.
3. Choose
Select All Networks
, then select your NPS 550.
4. Type
root
and
pass
at the login prompt.
5. Select
NETWARE MENU
.
6. Select
CONFSERV
.
7. Type the name of the NetWare file server dedicated as the configura-
tion file server, then select
OK
.
Example:
Use KILROY as configuration file server
8. Select
Save
, then select
Cancel
until AXCFG closes down.
