AXIS M3045-V Network Camera
How to set up the product
How to set up the product
The Axis product can be configured by users with administrator or operator rights. To open the product’s setup pages, click
Setup
in
the top right-hand corner of the live view window.
•
Administrators
have unrestricted access to all settings.
•
Operators
have restricted access to settings, see
See also the online help
.
Connect the Camera to a Monitor
When the camera is first connected to a monitor and then powered up, the default capture mode is automatically set for viewing the
image stream over HDMI. If the camera is connected to a monitor after power up, restart the camera or set the capture mode to
1080p (HDMI)@30/25 fps. This can be done from the
Capture mode
drop-down list from
Video
>
Camera Settings
. This can also be
done from the
Configure capture mode
window (see
Configure capture mode on page 10
) after a factory default (see
).
Note
It is recommended to use only HDMI certified monitors and cables. For more information see
www.hdmi.org
How to perform a basic setup
Basic Setup provides shortcuts to the settings that should be made before using the Axis product:
1. Users. See
.
2. TCP/IP. See
3. Date & Time. See
4. Video Stream. See
The Basic Setup menu can be disabled from
System Options > Security > Users
.
16
