Page 8
AXIS M3011 Installation Guide
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS Camera Management. In the window that appears double-click AXIS M3011 to open
the camera’s home page.
3. See page 9 for instructions on how to set the password. Set the IP address in multiple devices.
Assign an IP address in a single device
1. Select AXIS M3011 in AXIS Camera Management and
click the Assign IP button
.
2. Select
Assign the following IP address
and enter the
IP address, the subnet mask, and default router the
device will use.
3. Click
OK
.
Assign IP addresses in multiple devices
1. AXIS Camera Management speeds up the process of
assigning IP addresses to multiple devices, by suggesting IP
addresses from a specified range.
2. Select the devices you wish to configure (different models
can be selected) and click the Assign IP button
.
3. Select Assign the following IP address range and enter the
range of IP addresses, the subnet mask, and default router
the devices will use.
4. Click the OK button.
