Axis M3007-PV User Manual Download Page 5

Page: 5 / 55

AXIS M3007–PV

Hardware Overview

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch
shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. See

Electromagnetic Compatibility (EMC)

for regulatory requirements.

SD card slot -

A standard or high-capacity microSD card (not included) can be used for local recording with removable storage.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to

Setup > System

Options > Storage > SD Card

and click

Unmount

Control button -

The control button is used for:

•

Connecting to an AXIS Video Hosting System service. See

page 40

. To connect, press and hold the button for

about 1 second until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 40

. To connect, press and hold the button for

about 3 seconds.

•

Resetting the product to factory default settings. See

page 47

LED Indicators

Color

Indication

Unlit

Connection and normal operation

Amber

Steady during startup. Flashes during firmware upgrade.

Amber/red

Flashes amber/red if network connection is unavailable or lost.

Red

Flashes red for firmware upgrade failure.

Green

Shows steady green for 10 seconds for normal operation after restart.

Note

• The Status LED can be configured to flash while an event is active.

• The Status LED can be configured to flash for identifying the unit. Go to

Setup > System Options > Maintenance

Summary of Contents for M3007-PV
























































Search results

Summary of Contents for M3007-PV

Reviews:

Axis M3007-PV, User Manual, Page: 5 / 55

Search results

Summary of Contents for M3007-PV

Reviews: