Axis M3007-P, Installation Manual

Page: 4 / 20

response. If you are connected to the
Internet, you can:
• download user documentation and
firmware updates
• find answers to resolved problems in
the FAQ database. Search by
product, category, or phrases
• report problems to Axis support by
logging in to your private support
area.
Battery Replacement
This Axis product uses a 3.0 V CR2032
lithium battery as the power supply for
its internal real-time clock (RTC).
Under normal conditions this battery
will last for a minimum of 5 years. Low
battery power affects the operation of
the RTC, causing it to reset at every
power-up. A log message will appear
when the battery needs replacing. The
battery should not be replaced unless
required!
If the battery does need replacing,
please contact www.axis.com/techsup
for assistance.
• Dispose of used batteries according
to the manufacturer's instructions.
• Risk of explosion if battery is
incorrectly replaced.
• Replace only with the same or
equivalent battery, as recommended
by the manufacturer.
Dome Cover Cleaning
• Be careful not to scratch or damage
the dome cover. Do not clean a dome
cover that looks clean to the eye and
never polish the surface. Excessive
cleaning could damage the surface.
• For general cleaning of a dome cover
it is recommended to use a non-
abrasive, solvent-free neutral soap
or detergent with water and a soft
cloth. Rinse well with clean
lukewarm water. Dry with a soft
cloth to prevent water spotting.
• Never use harsh detergents, gasoline,
benzene or acetone etc. and avoid
cleaning in direct sunlight or at
elevated temperatures.
Warranty
To use this Axis product outdoors, it
shall be installed in an approved
outdoor housing.
www.axis.com/warranty