Axis M3007-P, Installation Manual

Page: 2 / 20

About this Document
This document includes instructions
for installing AXIS M3007-P/M3007-
PV on your network. Previous
experience of networking will be
beneficial when installing the product.
Legal Considerations
Video and audio surveillance can be
prohibited by laws that vary from
country to country. Check the laws in
your local region before using this
product for surveillance purposes. This
product includes one (1) H.264
decoder license. To purchase further
licenses, contact your reseller.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla,
Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW
are registered trademarks of the
respective holders. Java and all Java-
based trademarks and logos are
trademarks or registered trademarks of
Oracle and/or its affiliates. UPnP
TM
is a
certification mark of the UPnP
TM
Implementers Corporation.
Electromagnetic Compatibility
(EMC)
This equipment has been designed and
tested to fulfill applicable standards
for:
• Radio frequency emission when
installed according to the
instructions and used in its intended
environment.
• Immunity to electrical and
electromagnetic phenomena when
installed according to the
instructions and used in its intended
environment.
USA -
This equipment has been
tested using a shielded network cable
(STP) and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Canada -
This Class B digital
apparatus complies with Canadian
ICES-003.
Europe -
This digital equipment
fulfills the requirements for RF
emission according to the Class B limit
of EN 55022.
This product fulfills the requirements
for immunity according to EN 61000-
6-1 residential, commercial and light-
industrial environments.
This product fulfills the requirements
for immunity according to EN 61000-
6-2 industrial environments.
This product fulfills the requirements