Axis M1113, User Manual, Page: 27 / 49

AXIS M1113–E
Events
• Record Video — record video to a selected storage.
•
Send Images
— send images to a recipient.
•
Send Noti fi cations
— send a noti fi cation message to a recipient.
•
Status LED
— fl ash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and con fi guration.
Setting Up an Action Rule
An action rule de fi nes the conditions that must be met for the product to perform an action, for example record video or send email
noti fi cations. If multiple conditions are de fi ned, all must be met to trigger the action.
The following example describes how to set up an action rule to record video to a network share if there is movement in the
camera’s fi eld of view.
Set up motion detection and add a network share:
1. Go to Detectors > Motion Detection and con fi gure a motion detection window, see page 23
2. Go to System Options > Storage and set up the network share, see page 38 .
Set up the action rule:
1. Go to
Events
>
Action Rules
and click
Add
.
2. Select
Enable rule
and enter a descriptive name for the rule.
3. Select
Detectors
from the
Trigger
drop-down list.
4. Select Motion Detection from the drop-down list. Select the motion detection window to use.
5. Optionally, select a Schedule and Additional conditions , see below.
6. Under Actions , select Record Video from the Type drop-down list.
7. Select a
Stream pro fi le
and con fi gure the
Duration
settings as described below.
8. Select Network Share from the
Storage
drop-down list.
To add additional criteria, select the
Additional conditions
option and add additional triggers. To prevent an action from being
triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger
should be ignored before the action rule can be activated again.
The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time
and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered
again during the post-trigger time, the recording time will be extended with another post-trigger time period.
For more information, see the online help .
Schedules
Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside
of fi ce hours. Use one of the prede fi ned schedules or create a new schedule as described below.
To create a new schedule:
1. Go to Events > Schedules and click Add .
2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3. Click
OK
.
27