Figure 21 Window Covering (left), Mount Type (center), Power Source (right)
4. Use the arrow buttons to set the opened and closed positions for the shade. To begin, tap or
hold the up button until Gear reaches the fully-opened position of the window shade. Once
done, tap next.
If the shade closes when you tap the up button, select the checkbox below the arrow buttons
that says “Reverse Directions.”
On the next screen, tap or hold the down button until Gear is in the fully-closed position. Once it
is in the desired location, tap next. Gear will then confirm its new calibration points by flashing
all LEDs green twice. Gear is now ready for use.
