Axis F8214, Installation Manual

Page: 3 / 36

English
Safety Information
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide
for future reference.
Hazard Levels
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO NO NOTICE TICE TICE
Indicates a situation which, if not avoided, could
result in damage to property.
Other Message Levels
Important
Indicates significant information which is essential
for the product to function correctly.
Note
Indicates useful information which helps in getting
the most out of the product.
Safety Instructions
WARNING
•
The Axis product shall be installed by a trained
professional.
NO NO NOTICE TICE TICE
•
The Axis product shall be used in compliance
with local laws and regulations.
•
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol
cleaners.
•
Use a clean cloth dampened with pure water for
cleaning.
•
Use only accessories that comply with the
technical specification of the product. These can
be provided by Axis or a third party.
•
Use only spare parts provided by or recommended
by Axis.
•
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
•
Do not point the camera lens toward the sun or
other high-intensity radiation sources because
this could cause damage to the camera.
•
The power supply shall be plugged in to a socket
outlet installed near the product and shall be
easily accessible.
Transportation
NO NO NOTICE TICE TICE
•
Keep the protective packaging. When
transporting the Axis product, the protective
packaging shall be replaced in its original
position.
•
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Dome Cover
NO NO NOTICE TICE TICE
•
Be careful not to scratch, damage or leave
fingerprints on the dome cover because this
could decrease image quality. If possible, keep
the protective plastic on the dome cover until
the installation is complete.
•
Do not clean a dome cover that looks clean to
the eye and never polish the surface. Excessive
cleaning could damage the surface.
•
For general cleaning of the dome cover it is
recommended to use a non-abrasive, solvent-free
neutral soap or detergent mixed with pure water
and a soft, clean cloth. Rinse well with pure
lukewarm water. Dry with a soft, clean cloth to
prevent water spotting.
•
Never use harsh detergents, gasoline, benzene or
acetone etc. and avoid cleaning the dome cover
in direct sunlight or at elevated temperatures.
•
Make sure the dome is attached in operation
mode, otherwise focus may be affected.
•
Domes for L products come with an anti-scratch
surface. Avoid leaving finger prints on the dome
surface since this might impair image quality.
Français
Informations sur la sécurité
Lisez attentivement ce guide d'installation avant
d'installer l'appareil. Conservez le guide d'installation
pour toute référence ultérieure.
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT