manualshive.com logo in svg

Axis DIGITAL LINE L06DUS, Installation And Use Manual, Page: 5 / 52

Share
Download
Axis DIGITAL LINE L06DUS Installation And Use Manual Download Page 5

5

PICTOGRAMS

The installation and user instructions are valid for all models, unless otherwise specified by the following pictograms:

Danger! Situation presenting immediate dan-
ger, or a hazardous situation which could cause 
injury or death.

Read the instruction manual

Consult another section 

 

Earthing symbol

Further information

 

Equipotential symbol

Hot surfaces, risk of burns

INSTALLATION CODES AND STANDARDS

Installations within the United States, must follow:

--1.State and local codes.

--2.National Electrical Code (ANSI/NFPA No.70, latest edition) available from the National Fire Protection 

Association, 

Batterymarch Park, Quincy, MA 02269.

--3.Vapor Removal from CookingEquipment, (NFPA-96, latest edition) available from NFPA.

 -

WARNING

 

All installation work and non-routine maintenance must be performed exclusively 

by qualified technicians, authorised by the manufacturer, in compliance with the regulations 

in force in the user country and the regulations on systems and safety in the workplace.

WARNING

RISK OF FIRE OR ELECTRICAL SHOCK 

WARNING TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK

DO NOT REMOVE COVER OR BACK

NO USER - SERVICEABLE PARTS INSIDE

REPAIR SHOULD BE DONE BY AUTHORIZED

SERVICE PERSONNEL ONLY

 

DO NOT OPEN

Summary of Contents for DIGITAL LINE L06DUS





















































Reviews:

No comments