AXIS D2110-VE Security Radar
Configure your device
Create a rule in the radar:
3. Go to
Settings > System > Events
and add a rule.
4. Type a name for the rule.
5. From the list of triggers, select an include zone under
Radar motion
. To set up an include zone, see
6. From the list of conditions, select
Toggle I/O once
and then select the relay port.
7. Select
Active
.
8. Set the
Duration
.
9. Click
Save
.
How to control a PTZ camera with the radar
It is possible to use the information about objects’ positions from the radar to make a PTZ camera track objects.
There are two ways to do this:
•
Use the built-in
Radar autotracking
. Use this option when you have one PTZ camera and one radar mounted very close
together. This option creates an edge to edge solution where the radar directly controls the camera.
-
Go to
Settings > System > Radar autotracking
.
-
Enter the IP address, username and password for the PTZ camera.
-
Click
Connect
and follow the instructions.
Note
The camera must be installed directly above or below the detector.
The application requires exclusive PTZ control of the camera. To use one camera with multiple detectors, use the Windows
®
application AXIS Radar Autotracking for PTZ, available from
The application does not use the include zones in the detector. It uses the entire radar coverage, except exclude zones, to
detect motion.
•
Install AXIS Radar Autotracking for PTZ on your VMS server (or another computer with access to both the camera and
the radar), and follow the instructions in the application.
To download AXIS Radar Autotracking for PTZ, go to
.
This is a server-based solution that can handle different setups:
-
Control several PTZ cameras with one radar.
-
Control one PTZ camera with several radars.
-
Control several PTZ cameras with several radars.
-
Control one PTZ camera with one radar when they are mounted in different positions covering the same area.
How to minimize false alarms
If you notice that you get too many false alarms, you can filter out certain types of movement or objects, change the coverage, or
adjust the detection sensitivity. Test which settings work best for your environment.
•
Adjust the detection sensitivity:
14
