Axis CAMERA RECORDER 1.1 User Manual Download Page 63

Page: 63 / 77

AXIS Camera Station Web

AXIS Camera Station User’s Manual

AXIS Camera Station Web

A normal web browser can be used on client workstations to view live video
feed, recordings and I/O status.

To enable

live view, a set of IP addresses and port numbers must be opened in

your firewall; there must be an open port for each camera and one port for
AXIS Camera Station.

Simply viewing recorded events/images does not require the above firewall
configurations.

Important:

Note

•

For external web access from a WAN, enter the

WAN IP address under

General | Server IP address.

•

For internal web access from a LAN, enter the

LAN IP address of the

dedicated PC under

General | Server IP address.

•

In Windows XP Professional, a maximum of

five users can access to the

web interface simultaneously. This limitation is not present in other
operating systems.

•

Both AXIS Camera Station and AXIS ThinWizard software use port 80 as
default. You must change the port on

one of these programs if you intend

to use them on the same network segment.

•

To be able to log into AXIS Camera Station from a web browser, the user
must be created in the Windows user database. See Granting a User

Camera Access, on page 50.

When the web interface is installed on the server, web sharing is enabled.

Summary of Contents for CAMERA RECORDER 1.1














































































Search results

Summary of Contents for CAMERA RECORDER 1.1

Reviews:

Related manuals for CAMERA RECORDER 1.1

Brands by name

Popular brands

Axis CAMERA RECORDER 1.1, User Manual

Search results

Summary of Contents for CAMERA RECORDER 1.1

Reviews:

Related manuals for CAMERA RECORDER 1.1

Brands by name

Popular brands