AXIS T90A Installation Guide
Page 5
EN
GLIS
H
Installation
Follow these installation procedures:
1. Mount the illuminator.
2. Mount the PSU.
3. Extend or reduce the lead length as you wish.
4. Connect the LED output.
5. Adjust the PSU and telemetry if required. (Telemetry input is used when you require to remotely
control the illuminator.)
6. Connect the mains.
10cm - 10m
!
3
4
!
6
!
2
1
5
6
CAUTION: Red = +ve
Black = -ve
(polarity sensitive)
CAUTION:Connect all leads
LED output x2
Mains in
Telemetry input
and tighten fixings
