AXIS P1357-E Network Camera
Hardware overview
15. Bracket screws (4x)
16. Bracket adjustment screw
17. Wall bracket
18. Alternative cable hole
How to replace the lens
Note
There is no need to restart the product after changing the lens. However, the product must be restarted if you are
interchanging between different types of lenses. In order to set the focus and position the lens, the product must be
connected to the network.
It is possible to use optional lenses for the Axis product.
To replace the lens:
1. Disconnect the iris cable.
2. Unscrew the standard lens.
3. Attach and screw on the new lens.
Note
If you select a DC iris configuration file for a P-Iris lens, an error message will appear below the iris configuration type in
the
Camera Settings
page.
For optional DC iris lenses, select Generic DC iris option.
To change the iris configuration:
1. Go to
Setup > Video and Audio > Camera Settings
.
Iris configuration
shows the current configured iris type.
2. Click
Edit
.
3. Select the installed iris lens from the drop-down list and click
OK
.
To change the iris configuration for P-Iris lenses not listed in the drop-down list:
1. Download the iris configuration file from
www.axis.com
2. Go to
Setup > Video and Audio > Camera Settings
.
Iris configuration
shows the current configured iris type.
3. In
Iris configuration
: Click
Edit
.
4. Go to the
Upload
tab.
5. Click
Browse
and select the configuration file.
6. Click
Upload
. The installed iris lens should now be included in the
Iris Selection
drop-down list.
7. Select the installed iris lens from the drop-down list and click
OK
.
9