Resetting the Print Server
AXIS 5900
22
Resetting the Print Server
Follow the instructions below to reset the AXIS 5900 parameters to the default values
(Factory Default):
Important!
1. Remove the external power supply to switch off the AXIS 5900.
2. Press and hold down the test button, while you plug the external power supply back in.
Continue to hold down the test button, until the network indicator begins to flash at one
second intervals. This should take at least 5 seconds.
3. Release the test button and wait until the network indicator flashes at least five times.
4. Press and hold the test button again until the network indicator remains constantly lit.
5. Restart the AXIS 5900 by disconnecting and reconnecting the external power supply. The
print server is now reset to the factory default settings.
A Factory Default will reset the internal settings of the print server to default and should be performed
with caution. All parameters except Node Address (NODE_ADDR), Internet Address (IP_ADDR) and DHCP
enabled or disabled (DHCP_ENABLE.) will be reset.
9
Test Button
