34
AXIS 209MFD/MFD-R/MFD-R M12
System Log -
Provides information about system events.
Access Log -
The
Access Log
may be used for various purposes:
• Security - Tracking all access to your the camera. The access log lists the IP addresses, users and
networking protocols used to access the camera.
• Simple web attraction tracker.
• System analysis and trouble shooting.
Server Report -
Provides information about the server status and should always be included when
requesting support.
Parameter List -
Shows the unit's parameters and their current settings.
Connection List -
Lists all clients that are currently accessing video and audio. It is also used for system
analysis and trouble shooting.
Configuration
From the drop-down lists, select the size and level of information to be added to the
System
and
Access
Log
files.
The default information level for the
Access Log
is set to
Critical & Warnings
. However, in an error
situation and when requesting support, set it to the lowest information level
Critical & Warnings & Info
.
For the
Log Level for Email
, select from the drop-down list the level of information to send as email and
enter the destination email address.
Advanced
Scripting is an advanced function that provides the means for customizing and using scripts.
Caution!
The scripting function is a very powerful tool. Improper use may cause unexpected behavior or even loss of
contact with the unit. If a script does cause problems, reset the unit to its factory default settings (in which
case, a previously saved backup file will be useful for returning the unit to its latest configuration).
Axis strongly recommends that you do not use this function unless you fully understand its
consequences.
Axis support provides no assistance for customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config
- this function is for the advanced user with previous experience of configuring Axis cameras.
All parameters can be set and modified from this page. Help is available via the links on the standard setup
pages.
About
Third Party Software Licenses - click View licenses for a list of the licensed software used in the AXIS
209MFD/MFD-R/MFD-R M12 Network Dome Camera.
Resetting to the factory default settings
To reset the camera to the original factory default settings, go to the
System Options > Maintenance
web
page (as described in
Maintenance,
on page 33) or use the
Control button,
which is found inside the camera
cover (see page 6) as described below:
Using the Control Button
To reset the camera to the factory default settings using the Control Button:
1. Remove the camera’s cover.
2. Disconnect the network to remove power.
