32
AXIS 262 - System Options
SMTP (email) Settings
The AXIS 262 can send email to up to five preconfigured email addresses when a hard disk
error or system error occurs. To add an email address to the list:
1. Click
> SMTP(email) in the device’s Web pages.
2. Select an unused Number from the drop-down list.
3. Enter the email address in the Send email to field.
4. Click Save.
The settings on SMTP (email) Settings page enable and configure mail addresses, servers,
etc.
1. Click
> SMTP (email) Settings in the device’s Web pages.
2. Set the SMTP notification to ON.
3. Specify the email address shown as the sender of the email.
4. Enter the IP address or host name of the SMTP server to use for sending mail. You
can have primary and secondary SMTP servers.
5. If the SMTP server requires POP3 authentication before the AXIS 262 is allowed
to send mail, set POP3 Authentication to ON. The default setting is OFF.
6. If necessary, enter the IP address or host name of the POP3 server, the user name
and the password.
7. Click Save.
Maintenance
The Maintenance page contains tools for maintaining, upgrading and backing up the
configuration of the AXIS 262. Click
> Maintenance in the device’s Web pages to
open the Maintenance page. The following options are available:
• Restart: You can restart the AXIS 262 if you are experiencing problems.
• Restore: Resets all parameters, except the IP parameters, to the original factory settings.
• Default: Resets all parameters to the original settings.
• Upgrade: Install new firmware in the AXIS 262.
• Backup: Save all parameters to a backup file.
• Restore: Use a saved backup file to return the unit to a previous configuration.
Summary of Contents for 25221R3
Page 1: ...AXIS 262 Network Video Recorder User s Manual ...
Page 46: ......
