The System Options
AXIS 250S User’s Manual
38
The Factory Default Settings
In certain circumstances, it may be necessary to reinstate the
Factory Default
settings
for
your AXIS 250S. This is performed in one of two ways:
• By clicking the
Restore
button from the
Maintenance
page under System Options. This
action will reset most of the unit’s parameters but will save the IP-address, the Subnet
mask and the Default Router.
• By pressing the
Factory Default Button
, located on the front panel. This option will reset
ALL
the parameters currently configured in the unit, i.e. network settings, events, etc.
Follow the instructions below to reinstate the product factory default settings using the
Control Button:
1. Switch off the
AXIS 250S by disconnecting the power supply.
2. Press and hold the Factory Default Button pressed, and reconnect the power.
3. Keep the Factory Default Button pressed until the Status Indicator displays
yellow
(note
that this may take up to 15 seconds), then release the button. When the Status Indicator
displays
green
(which can take up to several minutes) the AXIS 250S will then have
been reset to its original factory default settings.
