4
AXIS 250S Blade - Rack Solution Installation Guide
AXIS 250S Blade Video Server
Read the following information to familiarize yourself with the AXIS 250S Blade video
server making particular note of where the connectors and indicators are located:
Control Button
See the AXIS 250S User’s Manual for information on the use of the
control button.
Control Button
Indicators
Connectors
Product Label
S/N
(serial number) is identical to the unit’s MAC/Ethernet address, e.g. 00408C1A2B3C =
00-40-8C-1A-2B-3C.
P/N
(part number) is the product model number.
Power
Green
Normal operation
Flashing green or unlit for power supply failure
Amber
Flashes amber during firmware upgrade
Status
Green
Normal operation
Red
Flashes rapid red for a critical error
Network
Amber
Flashes for activity on a 10 Mbit/s network
Green
Flashes for activity on a 100 Mbit/s network
Red
No network connection
None
No connection
MIC
Microphone connector
LINE
Line connector
VIDEO IN
Y/C video input
(S-video)
connection is made using an s-video cable
Video Input (BNC)
connection is made using an RG59, 75 Ohm coax
video cable; with a recommended maximum
length of 800 feet (250 meters).
Top and bottom screws
are used to secure the
blade server in the rack
P/N: XXXX-YYY-ZZ
S/N: 00408C1A2B3C
