Page 12
AXIS 209FD/AXIS 209FD-R Installation Guide
Complete the installation
1. Clean the dome with a dry soft cloth to remove dust and fingerprints and use a blower to
remove any dust from the lens.
2. To absorb any moisture in the
AXIS 209FD-R, remove the
supplied silica gel sachet (dry
bag) from the plastic bag and
affix inside the cover, behind
the dome.
3. Replace the cover and gently
tighten the tamper-proof screws
by hand (torque < 0.4 Nm),
using the supplied allen key. In
the AXIS 209FD-R, take care
not to pinch the gasket.
The installation is now complete.
Accessing the AXIS 209FD/FD-R from the Internet
Once installed, your AXIS 209FD/FD-R is accessible on your local network (LAN). To access
the camera from the Internet, network routers must be configured to allow incoming traffic,
which is usually done on a specific port. Please refer to the documentation for your router
for further instructions. For more information on this and other topics, visit the Axis Support
Web at www.axis.com/techsup
Affix dry bag here (AXIS 209FD-R)