Axis 01089-001, User Manual

Page: 40 / 60

XF40-Q2901 Explosion-Protected Temperature Alarm Camera
About recordings
To play a recording, follow these steps:
1. Go to Recordings > List .
2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply
the filters. See also How to find recordings on page 39 .
3. Select the recording and click Play . The recording will be played in a new browser window.
How to export a video clip
Recordings on the SD card or network share can be exported as video clips. You can export a complete recording or a part of a
recording.
Note
The exported recording is a Matroska video file (.mkv). To play the recording in Windows Media Player, AXIS Matroska File
Splitter must be installed. AXIS Matroska File Splitter can be downloaded from
www.axis.com/support/downloads
To export a video clip, follow these steps:
1. Go to Recordings > List .
2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply
the filters. See also How to find recordings on page 39 .
3. Select the recording and click Export . The Export Recording dialog opens.
4. By default, the complete recording is selected. To export a part of the recording, modify the start and stop times.
5. Optionally, enter a file name for the recording.
6. Click Export .
Note
Recordings can also be exported from the playback window.
About continuous recording
The Axis product can be configured to continuously save video to a storage device. For information about storage devices, see Storage
on page 50 . To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings.
If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a
new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they
are removed manually or through automatic removal of old recordings.
To start a continuous recording, follow these steps:
1. Go to Recordings > Continuous .
2. Select Enabled .
3. Select the type of storage device from the Storage list.
4. Select a Stream profile to use for continuous recordings.
5. Click Save to save and start the recording.
40