EN - 12
Troubleshooting
If you suspect something is wrong, immediately switch
RII
power. Do not use the unit
XQGHU
abnormal condition
V
,
e
J
without sound, or with smoke
!
General
!+$
9HKLFOHLJQLWLRQLVRII
.
"&E!$
Cable is not correctly connected.
Check connection.
Fuse is burnt.
Replace fuse.
; # +#$
Check volume or mute on / off.
If the above solutions cannot help.
1<:=:"$
Radio
Much noise in broadcast.
Station is too far, or signals are too weak.
Select other stations of higher signal level.
Preset station lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal that is always live.
Disc
Disc is inside but no sound.
Disc is upside down.
Place disc in the correct direction,
ZLWK
the label side up.
Disc is dirty or damaged.
Clean disc or change
WR
another disc.
Disc sound skips, tone quality
is low.
Disc is dirty or damaged.
Clean CD or change CD.
Sound skips due to vibration.
% 6K$
E'# 6K$
Unstable mounting.
Mount the unit securely with
DFFHV
s
RULHVVXSSOLHG
.
USB/SD/MMC mode
Unable to insert USB device or
SD/MMC card.
The memory card or USB device has been
inserted the wrong way round.
Insert it the other way around.
The USB device or SD/MMC
card cannot be read.
)R
#$
& # XE" XE"6 #$
different formats, some models of devices may not be read.
