Axion STIM-PRO X9 Plus, Instruction Manual

Page: 52 / 194

How to set personal TENS parameters
The settings can be adjusted according to the following steps.
1. Turn on the device
After the electrodes are placed firmly on skin and the lead
wires are plugged in the socket of device, press the
button.
2. Select mode
Select a mode by pressing the “MODE”
control. The mode you select will be
shown on the display. There are 5
modes available:
(B) Burst, (N) Normal, (M) Modulation, SD1 and SD2.
When a TENS-mode is selected, the LCD-Display will show
“TENS“. After a mode is selected, press
control to enter
next setting. Then press the or control to change
the settings. The settings are stored in the unit as soon as
selected.
Dual timer
The unit has a timer of 1-60 minutes and Continuous mode.
It can be adjusted by pressing the
and the or
controls. The application will end when the time is up.
Displaying time (L) for channels 1+2 / (R) for channels 3+4
Low battery indicator
If this symbol is shown, the battery is low and the batteries
need to be replaced immediately.
51
STIM-PRO X9+
EN
© Copyright Gebrauchs.info