Axion STIM-PRO T-400 Instruction Manual Download Page 4

GENERAL DESCRIPTION

SAFETY INFORMATION

The device is a battery-operated pulse generator that  
transmits electrical impulses via electrodes to the body. 
These impulses reach the nerves and muscles through the 
skin. The electronics of the STIM-PRO T-400 create electrical 
impulses that can be modified in intensity, pulse duration and  
frequency in the manual modes. All functions are easy to 
handle and the big display shows all parameter values  
clearly readable.

  

Read the instructions carefully before using the device.

  

Keep this device out of the reach of children.

  

Do not place electrodes in the area of the carotid arteries!

  

Do not place electrodes on the front of the throat!

  

Be careful with stimulation over metal implants.

  

User with an implanted electronic device like pacemakers  

    should only use the device under medical supervision.

  

Do not place electrodes above your heart!

  

Use with caution during pregnancy. Consult a doctor first!

  

Do not use electrodes on open wounds / injuries.

  

Do not use if you have fever.

  

Do not use if you have arrhythmia.

  

Do not use if you have epilepsy.

  

Never use the device when you are operating machines.

  

Never use near explosive or flammable gases.

  

Always TURN OFF the device before placing / removing 

 

   electrodes.

  

User with an implanted electronic device like pacemakers 

    should only use the device under medical supervision.

4

AXION

EN

Summary of Contents for STIM-PRO T-400
















Reviews: