Axion 16-3350 User Manual Download Page 10

 

10

E. Rechargeable Battery

   

 

Rechargeable Battery Installation and Use

   

 

The unit utilizes a set of long-life Ni-MH batteries for a 
portable power supply. Ni-MH batteries feature high 
storage capacity and a low level of degradation. This 
means that the Ni-MH batteries do not have “Memory 
Effect” and thus can be recharged safely, regardless of 
whether the battery is fully or only partially discharged. 
Fully charge the battery prior to first use.   

 

NOTE: 

Before you use the battery for the first time, 

ensure that the battery has been charged for at least 
eight hours. If you plan not to use the battery for an 
extended period of time (one week or longer), we 
recommend that you first fully charge the battery and 
store it away properly. For longer periods of storage, 
please recharge the battery at least once every two 
months to keep the battery in optimum condition. Never 
short the battery terminals, store the battery in a metal 
container, or leave the battery in a humid or damp 
environment. Store the battery in an airtight container 
with desiccant or other dehumidifying agent. Each full 
recharge takes approximately four hours and one full 
charge can provide power to the unit for approximately 
2 hours. During recharge, the red indicator will stay on. 
Once fully recharged, the red light will turn off. At this 
point you may remove the wall plug and stop charging. 

 

Summary of Contents for 16-3350



























Reviews: