AXIOMTEK UST100-504-FL Series, User Manual

Page: 16 / 64

UST100-504-FL Series u
ser’s Manual
Hardware Installation
8
Step 7 Flip the system back to its upright position and slide the system back
onto the bottom cover and fasten all screws to complete installation.
2.2 Installing 2.5
” SATA Device
Step 1 Turn off the system and unplug the power cord.
Step 2 Remove the screws on both sides of the system.
Step 3 Pull the main system away from its bottom cover, flip the system over
180 degrees and then put it upside down. (To avoid pulling the SATA
cable while extracting the system, be sure to first remove the cable
attached to the bottom cover.)
Step 4 Remove the SATA drive tray screws and round gaskets.
Step 5 Insert the HDD or SSD.