AXIOMTEK SHB211 Series, User Manual

Page: 36 / 112

SHB211 Socket P Half-Size SBC User’s Manual
Jumpers and Connectors
30
2.4.17 USB Connectors (USB5/USB6)
The Universal Serial Bus (USB) connector on the board is for the
installation of peripherals supporting the USB interface.
USB5 and
USB6 are 10-pin standard onboard USB connectors.
Pin Signal Pin Signal
1 USB POWER 2 USB POWER
3 USB D5- 4 USB D6-
5 USB D5+ 6 USB D6+
7 GND 8 GND
9 GND 10 GND
USB5/USB6
2.4.18 CompactFlash
TM
Socket (SCF1)
The board is equipped with a CompactFlash
TM
disk socket on the
solder side to support an IDE2 interface CompactFlash
TM
disk card.
The socket is especially designed to avoid incorrect installation of the
CompactFlash
TM
disk card. When installing or removing the
CompactFlash
TM
disk card, please make sure the system power is off.
The CompactFlash
TM
disk card is defaulted as the C: or D: disk drive in
your PC system.
Pin Signal Pin Signal
1 GND 26 CD1-
2 Data 3 27 Data 11
3 Data 4 28 Data 12
4 Data 5 29 Data 13
5 Data 6 30 Data 14
6 Data 7 31 Data 15
7 CS0# 32 CS1#
8 Address 10 33 VS1#
9 ATASEL 34 IORD#
10 Address 9 35 IOWR#
11 Address 8 36 WE#
12 Address 7 37 INTR
13 VCC 38 VCC
Pin Signal Pin Signal