AXIOMTEK SHB210 Series, User Manual

Page: 47 / 72

SHB210 Socket M Half-Size SBC User’s Manual
Award BIOS Utility
40
automatically remove the IDE Primary Master/
Slave PIO and/or IDE Secondary Master/Slave
PIO items on the menu.
¾ IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you
set a PIO mode (0-4) for each of the four IDE devices that
the onboard IDE interface supports. Modes 0 to 4 provide
successively increased performance. In Auto mode, the
system automatically determines the best mode for each
device.
¾ IDE Primary/Secondary Master/Slave UDMA
Select the mode of operation for the IDE drive. Ultra DMA-
33/66/100/133 implementation is possible only if your IDE
hard drive supports it and the operating environment
includes a DMA driver. If your hard drive and system
software both support Ultra DMA-33/66/100/133, select Auto
to enable UDMA mode by BIOS.
** On-Chip Serial ATA Setting **
z SATA Mode
There are these options for you to set up SATA mode: IDE, RAID or
AHCI.
z On-Chip Serial ATA
Use this item to enable or disable the built-in on-chip serial ATA.
z SATA PORT Speed Settings
Use this item to select SATA I or SATA II device support forcedly.
z PATA IDE Mode
Use this item to set the PATA IDE mode. When set to Primary, P1
and P3 are Secondary; on the other hand, when set to Secondary,
P0 and P2 are Primary.
z SATA Port
If the “PATA IDE Mode“ is Primary, it will show ” P1, P3 is
Secondary” which means SATA 2 and SATA 4 are Secondary. If
the “PATA IDE Mode “ is Secondary, it will show “ P0, P2 is
Primary “ which means SATA 1 and SATA 3 are Primary.
Press <Esc> to return to the Integrated Peripherals page.