SHB210 Socket M Half-Size SBC User’s Manual
Award BIOS Utility
36
z
Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is
“On”
.
z
Security Option
This item allows you to limit access to the system and Setup, or
just to Setup. The default value is
“Setup”
.
System
If a wrong password is entered at the prompt, the system
will not boot, the access to Setup will be denied, either.
Setup
If a wrong password is entered at the prompt, the system
will boot, but the access to Setup will be denied.
NOTE
:
To disable the security, select PASSWORD
SETTING at Main Menu and then you will be asked
to enter a password. Do not type anything, just
press <Enter> and it will disable the security. Once
the security is disabled, the system will boot and
you can enter Setup freely.
z
APIC Mode
Use this item to enable or disable APIC (Advanced Programmable
Interrupt Controller) mode that provides symmetric multi-
processing (SMP) for systems.
z
MPS Version Control For OS
This item specifies the version of the Multiprocessor Specification
(MPS). Version 1.4 has extended configuration tables to improve
support for multiple PCI bus configurations and provide future
expandability.
z
OS Select for DRAM >64MB
This item allows you to access the memory over 64MB in OS/2.
Press <Esc> to return to the Main Menu page.
Summary of Contents for SHB210 Series
