AXIOMTEK SHB106 Series, User Manual

Page: 30 / 97

SHB106 LAG1155 Full-Size SBC U
ser’s Manual
Hardware Installation
24
Step2 Removing the socket protective cover:
 Place thumb against the front edge of the protective cover and
rest index finger on the rear grip to maintain control of the cover.
 Lift the front edge of the protective cover to disengage from the
socket. Keep control of the cover by holding the rear grip with
index finger.
 Lift protective cover away from the socket, being careful not to
touch the electrical contacts.
NOTE: Vertical removal is NOT recommended, as it requires higher force
and can lead to socket contact damage.
Caution: Never Touch Fragile Socket Contacts to Avoid Damage and
Do Not Touch Processor Sensitive Contacts at Any Time During
Installation.