AXIOMTEK SHB101 Series, User Manual, Page: 42 / 85

SHB101
LGA775 SBC User’s Manual
36 PHOENIX-AWARD BIOS Utility
 Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or 80 tracks. The 360Kb type
is 40 tracks while 720Kb, 1.2MB and 1.44MB are all 80 tracks. The default value is
“
Enabled
”.
Enabled
BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Please be noted
BIOS can not differentiate 720K, 1.2M or 1.44M drive type as they all are 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by track number. There will be no
warning message displayed if the installed drive is 360K.

Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is
“On”
.
 Security Option
This item allows you to limit access to the system and Setup, or just to Setup. The default value
is
“Setup”
.
System
If a wrong password is entered at the prompt, the system will not boot, the access to
Setup will be denied, either.
Setup
If a wrong password is entered at the prompt, the system will boot, but the access to
Setup will be denied.
Note
To disable the security, select PASSWORD SETTING at Main Menu and then you
will be asked to enter a password. Do not type anything, just press <Enter> and it
will disable the security. Once the security is disabled, the system will boot and
you can enter Setup freely.
 APIC Mode
Use this item to enable or disable APIC (Advanced Programmable Interrupt Controller)
mode that provides symmetric multi-processing (SMP) for systems.
 MPS Version Control For OS
This item specifies the version of the Multiprocessor Specification (MPS). Version 1.4 has
extended configuration tables to improve support for multiple PCI bus configurations and
provide future expandability.
 OS Select for DRAM >64MB
This item allows you to access the memory over 64MB in OS/2.
Press <Esc> to return to the Main Menu page.