AXIOMTEK SBC86808 Series, User Manual

Page: 54 / 78

SBC86808 Pentium
®
M All-in-One Mini ITX Board User’s Manual
46
Award BIOS Utility
CMOS Setup Utility-Copyright © 1984-2001 Award Software
On board Device
USB Controller
Enable
USB 2.0 Controller
Enabled
Menu Level f
USB Keyboard Support
Disabled
USB Mouse Support Disabled
AC97 Audio Auto
Hance Rapid Watchdog 0
ÇÈÆÅ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
BIOS Setup Utility-Copyright © 1984-2001 Award Software
Super IO Device
Onboard FDC Controller
Enabled
Onboard Serial Port 1
3F8/IRQ4
Menu Level f
Onboard Serial Port 1
2F8/IRQ3
UART Mode Select Normal
Red, TxD Active Hi,Lo
IR Transmission Delay Enabled
UR2 Duplex Mode Half
Use IR Pins IR-Rx2Tx2
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
EPP Mode Select EEP1.7
ECP Mode Use DMA 3
ICH Serial Port 1 3E8
ICH Serial Port 1 Use IRQ IRQ10
ICH Serial Port 2 2E8
ICH Serial Port 2 Use IRQ IRQ11
PWRON after power fail OFF
ÇÈÆÅ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
z
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a
PIO mode (0-4) for each of the four IDE devices that the onboard
IDE interface supports. Modes 0 through 4 provide successively
increased performance. In Auto mode, the system automatically
determines the best mode for each device. The options available
are Auto, Mode 0, Mode 1, Mode 2, Mode 3, and Mode 4.
z
IDE Primary/Secondary Master/Slave UDMA