background image

SBC86620 AMD

® 

Geode GX3 Mini ITX Board User’s Manual 

 

Introduction

 

1.1 Specifications 

z

 

CPU:

 

AMD LX800(GX3) CPU ;LX700 is optional 

z

 

System Chipset:

 CS5536AD  

z

 

CPU Frequency: 

500MHz/433MHZ(LX700) 

z

 

BIOS:

 

„

 

Phoenix-Award BIOS, Y2K compliant 

„

 

4Mbit Flash, DMI, Plug and Play 

„

 

SmartView for multiple LCD type selection, display mode 

option and application extension features 

„

 

RPL/PXE Ethernet Boot ROM 

„

 

“Load Optimized Default” to backup customized Setting in 

the BIOS flash chip to prevent from CMOS battery fail 

z

 

System Memory:

 

„

 

One 1*184-pin DDR DIMM  

„

 

Maximum DDR of up to 1GB DDR333     

z

 

Onboard IDE:

 

„

 

1* PATA-100 with 40-pin 2.54 pitch box-header  

„

 

PATA-100 as PIO Mode 0-4, DMA Mode 0-2 and Ultra 

DMA/33/66/100 

z

 

Compact Flash Socket:

 

„

 

One Compact Flash Type II Socket 

z

 

Onboard Multi I/O:  

„

 

3 x RS-232 

1 x RS-232/422/485  

„

 

PCI slot expansion 

z

 

USB Interface: 

4 USB ports with fuse protection and 
complies with USB Spec. Rev. 2.0 

z

 

Real Time Clock:

 Integrate 

CS5536AD 

z

 

Watchdog Timer:

 

„

 

1~255 seconds; up to 255 levels 

z

 

Graphics/Streaming: 

„

 

Integrate LX800   

Summary of Contents for SBC86620 Series



























































































Reviews: