AXIOMTEK SBC8355, User Manual

Page: 82 / 102

SBC8355 All-in-One Petit Board Series User’s Manual
Award BIOS Utility
>*
# # # #" " " "
PM Control by APM
$'),<',=
0 ; ))
)
Yes
No System BIOS will ignore APM when power managing the system
Yes
System BIOS will wait for APM’s prompt before it enters any PM
mode (i.e., DOZE, STANDBY or SUSPEND).
Note: If APM is installed or if there is a task running, even when
the timer has timed out, the APM will not prompt the BIOS
to put the system into any power saving mode
!
NOTE:
If APM is not installed, this option has no effect.
# # # #" " " "
Video Off Method
(
V/H SYNC+Blank
Turns OFF vertical and horizontal synchronization
ports and writes blanks to the video buffer
DPMS
Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the
Video Electronics Standards Association (VESA). Use
the software supplied for your video subsystem to
select video power management values.
Blank Screen System only writes blanks to the video buffer.
# # # #" " " "
Video Off After
')) 0
)
Standby
NA System BIOS will never turn off the screen
Suspend Screen off when system is in SUSPEND mode
Standby Screen off when system is in STANDBY mode
Doze Screen off when system is in DOZE mode
NOTE:
Green monitors detect the V/H SYNC signals to turn off
its electron gun
# # # #" " " "
Modem Use IRQ
3, 4, 5, 7, 9,
10, 11, NA For external modem, 3 or 4 will be used for card type
modem. It is up to card definition. Default is 3.