AXIOMTEK SBC8233, User Manual

Page: 71 / 74

SBC8233 All-in-One 386SX CPU Card Series User's Manual
POST Error Codes
%"
80
Keyboard test started. Clearing output buffer, checking for stuck key. About to
issue keyboard reset command.
81
Keyboard reset error/stuck key found. About to issue keyboard controller
interface test command.
82
Keyboard controller interface test over.
About to write command byte and init circular buffer.
83
Command byte written, Global data init done.
About to check for lock-key.
84
Lock-key checking over.
About to check for memory size mismatch with CMOS.
85
Memory size check done. About to display soft error and check for password
or by pass setup.
86
Password checked.
About to do programming before setup.
87
Programming before setup complete.
Going to uncompress SETUP code and execute CMOS setup.
88
Returned from CMOS setup program and screen is cleared. About to do
programming after setup.
89
Programming after setup complete.
Going to display power on screen message.
8B
First screen message display. <WAIT...>message displayed. About to do Main
and Video BIOS shadow.
8C
Main and Video BIOS shadow successful.
Setup options programming after CMOS setup about to start.
8D
Set up options are programmed, mouse check and init to be done next.
8E
Mouse check and initialization complete.
Going for hard disk controller reset.
8F
Hard disk controller reset done. Floppy setup to be done next.
91
Floppy setup complete. Hard disk setup to be done next.
94
Hard disk setup complete.
Going to set base and extended memory size.
95
Memory size adjusted due to mouse support, hdisk type-47. Init of different
BUSes optional ROMs from C800 to start. (Please see Reference for details
of different BUSes)
96
Going to do any init before C800 optional ROM control.
97
Any init before C800 optional ROM control is over.
Optional ROM check and control will be done next.
Continued . . . . .
Checkpoint Description