SBC81870 Intel
®
Pentium
®
M w/ DDR/VGA/Dual LAN
Award BIOS Setup
68
3. Primary Master/Slave UDMA
Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE
hard drive supports it and the operating environment
includes a DMA driver (Windows 95 OSR2 or a third-party
IDE bus master driver). If you hard drive and your system
software both support Ultra DMA/33, select Auto to enable
BIOS support.
4. IDE HDD Block Mode
Block mode is also called block transfer, multiple
commands, or multiple sector read/write. If your IDE hard
drive supports block mode (most new drives do), select
Enabled for automatic detection of the optimal number of
block read/writes per sector the drive can support.
ONBOARD DEVICE:
The options for these items are found in its sub menu. By
pressing the <ENTER> key, you are prompt to enter the sub
menu of the detailed options as shown below:
Phoenix
–
Award CMOS Setup Utility
Onboard Device
Item Help
USB Controller
USB 2.0 Support
USB Keyboard Support
USB Mouse Support
AC97 Audio
Onboard LAN
Init Display First
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Onboard]
Menu Level
►
↑↓→←
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit
F1:General Help
F5: Previous Values F6:Fail-Safe Defaults
F7:Optimized Defaults
Descriptions on each item above are as follows:
1. USB
Controller
This should be enabled if your system has a USB installed on
the system board and you want to use it. Even when so
equipped, if you add a higher performance controller, you will
need to disable this feature.
