![background image](http://html1.mh-extra.com/html/axiomtek/sbc81206-series/sbc81206-series_user-manual_3037588008.webp)
SBC81206 PICMG1.0
SBC User’s Manual
2
Introduction
System Memory
Two 240-pin unbuffered DDR2 DIMM sockets
Maximum to 2GB DDR2 400/533/667 MHz memory
Onboard Multi I/O
Controller: Winbond W83627HG
Parallel Port: one bi-directional with ECP/EPP/SPP support
Serial Ports: One ports for RS-232(COM1) and one port for RS-232/422/485(COM2)
Floppy controller: supports two drives (1.44MB for each)
USB Interface
Six USB ports with fuse protection and complies with USB Spec. Rev. 2.0
Display
Chipset Integrated VGA Controller and Supports up to 2048x1536 at 75 Hz
resolution on non-interlaced CRT monitors via 15-pin D-Sub connector on the edge
Watchdog Timer
1~255 seconds; up to 255 levels
Ethernet
The LAN1/LAN2: Dual port with RTL8111B for Gigabit/Fast Ethernet
Via PCI Express x1 bus
Wake-on-LAN support
Serial ATA
Built-in four SATA/SATA II ports onboard support the maximum transfer rate up to 3.0
Gb/sec and SATA RAID 0/1/5/10 by ICH7R
Hardware Monitoring
Monitoring temperatures, voltages, and cooling fan status
Dimensions
338 x 122 mm (6 layers)
Note
All specifications and images are subject to change without notice.