AXIOMTEK NA860 series, User Manual

Page: 21 / 88

NA860 Series User
’s Manual
Hardware and Installation 15
2.4 Jumper Settings for AX93341
Jumper is a small component consists of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration
shows how to set up jumper.
This section provides the information about jumpers and connectors of NA570 Series. Properly
configure jumper settings on the main board in this appliance to meet your application purpose.
Below we list a summary table of all jumpers and default settings for onboard devices.
Jumper Definition Jumper Setting
JP1 TACT Switch(Down) Selection
1-2
：
Power button
3-4
：
Reset(Default)
5-6
：
GPIO
2.4.1 TACT Switch Selection (JP1)
Description Function Jumper Setting
TACT Switch(Down)
Selection
Power button
Reset(Default)
GPIO