
SBC8A814 Hardware Installation Guide
Award BIOS Utility
Video off Method
In suspending, this item allows you to select the CRT closed
method under APM mode.
The choice: Blank Screen, V/H SYNC+Blank, DPMS
Video Off In Suspend
In suspending, this item allows you to select if you want to close
the CRT under APM mode.
The choice: Yes, No.
Suspend Mode
After the set time (1 hr) of system inactivity, all devices except
the CPU will be shut off.
HDD Power Down
After the set time (15 min) of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Soft-off by PWR-BTTN
Instant off
(Default): Push power button. Then the device can be
off the power supply right away.
Delay 4 second: Need to push the power button about 4 seconds.
Then the device just can be off.
Resume by Alarm
When
Enabled,
your can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The choice: Enabled, Disabled.
39
Summary of Contents for NA-814
