NA-806D Hardware Installation Guide
Award BIOS Utility
39
A p p e n d i x A
Warning
z
This is a class A Product. In a domestic Environment this Product
may cause radio interference in which case the user may be required
to take adequate measures.
z
It will be danger if battery is incorrectly replaced. Replacing only with
the same or equivalent type is highly recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
Warning for Hard Disk Drive Selection:
TUV approved Hard Disk Drive is preferred for TUV compliance Hard
Disk drive-Optional, (NWGQ2), generic, Input Voltage rated 5V
dc/1.0A, 12V dc/1.8A maximum. Minimum clearance from uninsulated
live parts 4.0 mm.
“The equipment is to be installed in an environment with maximum
ambient temperature must not exceed 40
°
C.”
“The openings on the enclosure are for air convection hence protected
the equipment from overheating. DO NOT COVER THE OPENINGS.”
“Lay this equipment on a reliable surface when install. A drop or fall
could cause injury.”
“The equipment shall be installed according to specification as
nameplate. Make sure the voltage of the power source when connect
the equipment to the power outlet. The current of load and output
power of loads shall be not over the specification.”
“This equipment must be connected to the reliable earthing before
using.”
Electric shock hazard inside the redundant power supply
The exchange of modules shall be done by service person.