NA-806B / C Hardware Installation Guide
Award BIOS Utility
10
2.2.3 Installing a ATA66/100/133 hard drive
To accommodate the fast transfer rate of Ultra ATA 66/100/133, a cable (with
44 pin connectors on both ends) is necessary when installing Ultra
DMA/66/100/133 drives. The
NA-806D
, on this aspect, can support 2.5” IDE
hard drive and DOM (Disk on Module) deployment. It is through the IDE
Connector (
CN15, CN16
)
2.2.4 Connectors & Jumpers
The connectors allow the CPU card to connect with other parts of the system.
Some problems encountered by your system may be a result from loose or
improper connections. Ensure that all connectors are in place and firmly
attached. The following table lists the function of each connector on the main
board.
Connectors Label
Connectors Label
Ethernet Connector 1
LAN1
Mini-PCI Connetcor
J1
Ethernet Connector 2
LAN2
SODIMM DDR Memory
Socket
J2
Ethernet Connector 3
LAN3
Compact Flash Card Slot
(Option)
J3
Ethernet Connector 4
LAN4
Power LED, HD LED,
Reset, Speaker Connector
PLRS1
Power Connector
CN1
Internal Battery
BT1
VGA Connector
CN8
Internal Buzzer
BU1
LVDS Connector 1
CN9
USB Port 1, 2 Connector
USBA2
LVDS Connector 2
CN10
System BIOS
U25
COM2
CN11
Clear CMOS Data
JP6
Internal Keyboard / Mouse
Connector
CN14
Select CF voltage
JP7
Primary IDE Connector
CN15
Select Panel VoltageLVDS
Connector 2
JP8
Secondary IDE Connector
CN16
Select CF Master / Slave
JP9
COM1
CN17,
CN28
LAN by-pass Function
JP10