AXIOMTEK NA-401, Hardware Installation Manual

Page: 67 / 68

NA-401 Hardware Installation Guide
Warning
61
Appendix A
Warning
z
This is a class A Product. In a domestic Environment this
Product may cause radio interference in which case the user
may be required to take adequate measures.
z
It will be danger if battery is incorrectly replaced. Replacing only
with the same or equivalent type is highly recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
z
Warning for Hard Disk Drive Selection:
TUV approved Hard Disk Drive is preferred for TUV compliance
Hard Disk drive-Optional, (NWGQ2), generic, Input Voltage rated 5V
dc/1.0A, 12V dc/1.8A maximum. Minimum clearance from uninsulated
live parts 4.0 mm.
“The equipment is to be installed in an environment with
maximum ambient temperature must not exceed 40
°
C.”
“The openings on the enclosure are for air convection
hence protected the equipment from overheating. DO NOT
COVER THE OPENINGS.”