AXIOMTEK MANO861, User Manual, Page: 18 / 64

MANO861 Mini ITX Board
12 Board and Pin Assignments
2.4.6 Power Connectors (EATXPWR and ATX12V)
Both connectors are for ATX power supply plugs. The power supply plugs are designed
to fit these connectors in only one orientation. Find the proper orientation and push down
firmly until the connectors completely fit.
EATXPWR
ATX12V
Note

Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.

Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Pin Signal Pin Signal
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 Ground 15 Ground
4 +5V
16 PS-ON# (power supply
remote on/off)
5 Ground 17 Ground
6 +5V 18 Ground
7 Ground 19 Ground
8
PWRGD (Power
Good) 20 No connect
9 +5V (Standby) 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 Ground
Pin Signal Pin Signal
1 GND 3 +12V
2 GND 4 +12V
1
12 24
13