AXIOMTEK MANO860, User Manual

Page: 14 / 88

MANO860 User’s Manual
10
BIOS Setup
- High Definition Audio
- USB: Gen 2.0, up to 12 ports
- SMBus 2.0
- LPC Bus
• Supports SPI devices
- Hardware Monitor
Fan control (Voltage, Temp)
Watchdog timer
1.2 Before you Proceed
Take note of the following precautions before you install motherboard components or change any motherboard
settings.

Unplug the power cord from the wall socket before touching any component.

Use a grounded wrist strap or touch a safely grounded object or a metal object, such
as the power supply case, before handling components to avoid damaging them
due to static electricity

Hold components by the edges to avoid touching the ICs on them.

Whenever you uninstall any component, place it on a grounded anti-static pad or in
the bag that came with the component.

Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, and/or components.
1.3 Motherboard Overview
Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits
into it. Refer to the chassis documentation before installing the motherboard.
Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so can cause you physical injury and damage motherboard components.
1.3.1 Placement Direction
When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The
edge with external ports goes to the rear part of the chassis as indicated in the image below.