AXIOMTEK MANO523 Series, User Manual

Page: 16 / 87

MANO523 Mini ITX Motherboard
10 Board and Pin Assignments
2.3.4 EDP VDD Select (JP5)
The motherboard supports voltage selection for embedded DisplayPort (eDP). Use this
jumper to set up VDD power of the eDP connector. To prevent hardware damage, before
connecting please make sure that the input voltage of display panel is correct.
2.3.5 Clear CMOS (SW1)
This switch allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear
the CMOS memory of date, time, and system setup parameters by erasing the CMOS
RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which
includes system setup information such as system passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Press the tact switch for at least 1 second.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Function Setting
+3.3V (Default) 1-2 close
+5V 3-4 close
+12V 5-6 close
Function Setting
Normal (Default) Release
Restore BIOS optimal defaults Press